..:: Linux CaPhede ::..

Linux itu Mudah

wvdial: carrier signal lost

Posted by firstly pada Agustus 5, 2007

# wvdial
–> WvDial: Internet dialer version 1.56
–> Initializing modem.
–> Sending: ATZ
ATZ
OK
–> Sending: AT+CRM=1
AT+CRM=1
OK
–> Sending: AT+cso=33
AT+cso=33
OK
–> Modem initialized.
–> Idle Seconds = 300, disabling automatic reconnect.
–> Sending: ATDT#777
–> Waiting for carrier.
ATDT#777
CONNECT
~[7f]}#@!}!}!} }3}”}&} } } } }#}%B#}%}’}”}(}”W}0~
–> Carrier detected.  Waiting for prompt.
–> Connected, but carrier signal lost!  Retrying…
–> Sending: ATDT#777
–> Waiting for carrier.
===============================

Edit /etc/wvdial.conf :
Comment this line:
#Carrier Check = no
Add this line:
Stupid Mode = yes

# wvdial
–> WvDial: Internet dialer version 1.56
–> Initializing modem.
–> Sending: AT+crm=1
AT+crm=1
OK
–> Sending: AT+cso=33
AT+cso=33
OK
–> Modem initialized.
–> Sending: ATDT#777
–> Waiting for carrier.
ATDT#777
CONNECT
~[7f]}#@!}!}!} }3}”}&} } } } }#}%B#}%}’}”}(}”W}0~
–> Carrier detected.  Starting PPP immediately.
–> Starting pppd at Sun Aug  5 23:49:37 2007
–> Pid of pppd: 13779
–> Using interface ppp0
–> pppd: �[10][06][08][18][01][06][08]
–> pppd: �[10][06][08][18][01][06][08]
–> pppd: �[10][06][08][18][01][06][08]
–> pppd: �[10][06][08][18][01][06][08]
–> pppd: �[10][06][08][18][01][06][08]
–> pppd: �[10][06][08][18][01][06][08]
–> pppd: �[10][06][08][18][01][06][08]
–> local  IP address 10.245.169.38
–> pppd: �[10][06][08][18][01][06][08]
–> remote IP address 10.64.64.64
–> pppd: �[10][06][08][18][01][06][08]
–> primary   DNS address 202.152.165.36
–> pppd: �[10][06][08][18][01][06][08]
–> secondary DNS address 202.93.40.174
–> pppd: �[10][06][08][18][01][06][08]

Iklan

4 Tanggapan to “wvdial: carrier signal lost”

  1. […] wvdial: carrier signal lost […]

  2. Endaryanto said

    thx..akhirnya bisa juga pakai wvdial

  3. Thx Mas, Punya w juga da bisa, sekalian sharing, untuk para pembaca yang menggunakan modem K-Touch E329 Smart, bisa liat juga di blog saya, lengkap dengan langkah-langkahnya 🙂

    http://budigunawan.wordpress.com

  4. Fahmi said

    Buat para master linux,

    Minta tolong setting internet menggunakan huawei E160 provider 3, soalnya dah sempet berhasil pake :

    [Dialer three]
    Auto DNS = 1
    Init1 = ATZ
    Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
    Stupid Mode = 1
    Modem Type = USB Modem
    ISDN = 0
    New PPPD = yes
    Phone = *99#
    Modem = /dev/ttyUSB0
    Username = 3data
    Auto Reconnect = on
    Password = 3data
    Baud = 230400
    catatan wvdial sudah terinstal
    maslah yang dihadapi komputer tidak bisa mendeteksi carrier

Tinggalkan Balasan

Isikan data di bawah atau klik salah satu ikon untuk log in:

Logo WordPress.com

You are commenting using your WordPress.com account. Logout / Ubah )

Gambar Twitter

You are commenting using your Twitter account. Logout / Ubah )

Foto Facebook

You are commenting using your Facebook account. Logout / Ubah )

Foto Google+

You are commenting using your Google+ account. Logout / Ubah )

Connecting to %s

 
%d blogger menyukai ini: